Search the whole station
Wenzhou Feilong Polyurethane Equipment Engineering Co., Ltd.
Chinese website: http://www.pumcn.com/
English website: https://www.flpumachine.com/
Many factories producing polyurethane wheels, rollers, seals and air filter gaskets face the same trouble. The frame and raw material tanks of old casting machines still look intact, yet they suffer unstable ratio, worn metering pumps and outdated relay controls which make parameter adjustment difficult and lead to defective parts.
A common idea for factory owners is to install new metering pumps plus a PLC touchscreen control system, while keeping the original frame, tanks, mixing head and pipelines. The investment may be less than one third of a brand-new machine. It sounds cost-effective, yet this retrofit solution is not suitable for every old unit. Blind retrofitting often results in wasted budget and persistent production issues.

1. When retrofitting only pumps and control system works well
You can choose this low-cost upgrade if most of the following requirements are satisfied:
1.1 The machine frame and material tanks are structurally sound, free from deformation and weld leakage. Jacket heating and thermal insulation of tanks work normally;
1.2 The mixing head shows minor wear. Internal blades and seals remain in good condition with sufficient shear force to guarantee uniform mixing;
1.3 Pipelines, valves and circulation loops have no severe aging, cured material buildup or leakage;
1.4 The production formula is stable with low filler content and non-corros raw materials. The main problems are poor dosing accuracy and inconvenient manual control without recipe storage;
1.5 No immediate plan for large capacity expansion or switching to high-filled, flame-retardant formulations with aluminum hydroxide.
Under these conditions, upgrading to servo metering pumps and closed-loop PLC control system supports automatic ratio compensation, recipe storage, precise shot control and auto-cleaning sequences. Product yield improves obviously and the return on investment is fast. It is a proven cost-saving method in the PU industry.

2. Hidden risks if you only replace pumps and controls
Most failed retrofits happen because buyers only focus on pumps and controllers while ignoring the interconnection of the whole fluid system.
2.1 Worn mixing head limits final product quality
After long service, the inner cavity and blades of mixing heads wear out and shear efficiency drops. Even if the metering pumps deliver perfectly stable flow, insufficient mixing still causes bubbles, delamination and uneven hardness in finished parts. The quality problem shifts to mixing and becomes hard to troubleshoot.
2.2 Aged pipelines, valves and seals are potential hazards
Polyurethane raw materials gradually degrade hose liners, flange seals and valve bodies. New metering pumps have different pressure characteristics. Pressure fluctuation after retrofit may trigger leakage or hose burst. For calcium carbonate or aluminum hydroxide filled slurry, sediment abrasion accelerates pipeline failure. Many retrofitted machines run fine for one or two months and then suffer frequent clogging and leakage.
2.3 Tank temperature control and agitation may not match new metering system
Modern servo metering systems require stable raw material temperature. If old jacket heat exchange is inefficient or agitators cannot keep continuous circulation during standby, temperature drift and filler settlement occur. Even high-precision pumps cannot maintain stable ratio when raw material viscosity keeps changing.
2.4 Mismatched mounting structure and coaxiality
New pumps differ in installation dimension and torque output from old ones. Improper adapter brackets bring misalignment and vibration, which quickly wear pump bearings and shorten the service life of new pumps.
2.5 Outdated safety interlock, emergency stop and grounding circuits
Old wiring is often messy. New control logic may conflict with legacy safety circuits, leading to false alarms or failed safety interlocks. Such units cannot pass inspection for explosion-proof workshops or export orders.
3. Inspection checklist before retrofit
3
3.1 Inspect mixing head internal wear, clearances and seals; decide whether refurbishment or replacement is needed;
3.2 Pressure test all pipelines, valves and circulation loops, replace aged hoses and failed seals;
3.3 Check jacket heat exchange and agitator performance; evaluate insulation and circulation upgrade;
3.4 Verify pump mounting base, transmission, damping and coaxiality plan;
3.5 Confirm production process: filled slurry, corrosive raw materials, explosion-proof requirements and export compliance;
3.6 Clarify upgrade goals: only improve dosing accuracy, or add automatic pouring and circulation functions later.
Three typical solutions after evaluation:
✅ Light retrofit: replace metering pump and control system only, for machines with qualified auxiliary parts, best for cost saving;
⚠️ Medium retrofit: pumps + control system + mixing head refurbishment + full replacement of hoses, seals and valves;
❌ Retrofit not recommended: deformed frame, heavily worn mixing head, leaking tank and corroded pipelines. Refurbishment cost approaches a new machine and frequent downtime is expected. Buying a new machine is a better choice.

4. Retrofit or new machine: simple guidance
4.1 Tight budget, solid machine condition and stable formula: pump & control upgrade is preferred with low cost and short lead time;
4.2 Old machine with heavily worn mixing head, regular high-filler production and long-term stable operation target: avoid partial retrofit. Full refurbishment or new machine purchase reduces production loss;
4.3 No matter which retrofit plan you select, run FAT test casting and continuous trial production to verify ratio accuracy, temperature stability and mixing performance before formal production.
Conclusion
Retrofitting by replacing only metering pumps and control system can cut your investment, yet it is not a universal fix. It makes good use of intact existing structures. If core auxiliary components are already worn out, upgrading metering and control alone merely delays breakdowns.
Wenzhou Feilong Polyurethane Equipment Engineering Co., Ltd. provides on-site inspection, metering pump upgrade, control retrofitting and mixing head refurbishment services for old casting machines. We customize solutions objectively instead of pushing unnecessary upgrades or new machines.